Sunday, January 23, 2011
The Albright knot is used in situations where you need to join two lines of greatly unequal diameter or of different material. Mostly used in saltwater situations, I prefer this knot for joining of fly line to backing material.
Step 1. Loop the heavier line (wider diameter) and place it between your thumb and index finger of your left hand. Pass the lighter line through the formed loop leaving yourself about 8 inches. Pinch the lighter line in with the line already in your left hand.
Step 2. Make approximately 10 wraps with the lighter line wrapping away from you and working from left to right. With each wrap, work your thumb and index finger along holding these wraps in place, trying not to let up any pressure on your left hand. On the 10th wrap, come around and then through the remaining loop. Taking the standing line in your right hand, and pull gently as you push the wraps with your left hand towards the closed loop. Alternate between the end of the lighter line, and on the standing part until the wraps are against the tag end. Make sure the wraps do not go over each other and that you don't push them to far. Pull the tag tight then pull on the standing part of both lines until the knot is secure.
Step 3. Finally, clip the two short pieces close to the knot.
Posted by Mr. Gus at 3:32 PM